Boost Your Internet Speed connection on your PC or laptop is not easy as various aspects can sluggish down your connection. This article will show you many ways to repair and speed up your relationship.
Zooming in is a simple and effective way to speed up your Internet connection. The further away your PC or laptop is from your WiFi router, the slower your Internet connection will be.
The first thing you should do is check the capacity of the circuit or circuits you have contracted to comply with the characteristics that we have explained to you at the beginning of this article.
You have to check the characteristics of your customers’ fiber routers, also called ONTs. These routers exist with 100 Mbps network cards. So if your idea is to sell higher rates, you must consider that the cost of the client equipment will be higher. It is WiFi characteristics since you will have to invest in the case of wanting to improve the conditions of service to these subscribers.
It should note that it is increasingly difficult to find equipment with a 100Mbps network card. Therefore, it is increasingly more accessible and cheaper to buy and install client routers with 1Gbps cards. These will allow you to increase the capacity of your clients’ services up to 1 Gbps. A good strategy, as long as you consider your local competitors’ services. Never lower prices just because the market you are targeting is cheaper.
For all those people who have such a hard time figuring out what is going on, they never load their pages or download their files. This article is for all of them, in which we will try to explain how to Boost your internet speed with the techniques and tactics that we can enjoy in the year 2020.
Sensing that your Internet is going wrong is not enough; therefore, the best thing you can do is test your speed. Because if you don’t know the rate you’re already reaching, you’ll never know if you’re improving it a lot, a little, or getting worse. There are many applications that you can find on the Internet for this. Do not limit yourself to a single measurement. Carry out the process for several days and on several occasions so you can assume saturation schedules or some specific problems.
It may seem too easy, but connectivity problems resolve by restarting the router. Such as operating system failures, two devices with the same IP, and this conflict causes the network to fail, excess heat…
So, you know, hit the “big button” before you go crazy looking for possible and intricate problems and solutions.
You may not have suspected it, but some devices are not tied to WiFi and can sometimes operate on the same 2.4Ghz or 5GHz frequencies.
From blueTooth devices, mobile phones, baby monitors, misplaced satellite dishes, power supplies, LCD screens… The microwave, for example, can generate radio frequencies that hinder the network until it slows down or even disconnects it.
Therefore you must place the router strategically and as far away as possible. It may also be a good idea to turn off (temporarily) those electronic devices that may bother you to see how their interference affects you. Too bad we can solve the frequency interference by changing the WiFi channel for the router.
Your friendly neighbours and their inherent routers may interfere with yours, causing your signal to suffer. It is because wireless routers operate on different channels. It is best to put yours on the track with minor interference. To find the medium that suits you best, you can use WiFi Stumbler or WiFi Analyzer tools.
In turn, you must consider the FTTH headend’s capabilities. If the GPON ports of the headend are very saturated in clients and client consumption. Remember that the proportion of the superior capacity between 150 and 200% of your highest tariff must fulfil in the entire network structure. In addition, the totality of the contracted circuit or circuits.
When a technician comes to your house to install your carrier’s router. They place it as close as possible to your home phone connection or the computer you are using. But this is not always the optimal position to cover the maximum possible area in your house. The first piece of advice is to place the router in a central location in your home. Both vertically if you have several floors and horizontally.
In a multi-store apartment, you want to place it on an intermediate floor in the vertical position. In single-store flats, try to make it at least as high as the devices connected, such as a table. And in the horizontal position, the idea is the same: trying to get the router to be in the center of the area you are trying to cover.
Lotteries are not something new in India. The Indian government itself has many lotteries being… Read More